GBC eWire Service Manual page 254

6. Remove the M4 screws (2) securing the Tapper to the eWire Frame
7. Carefully Remove the Tapper Assembly from the eWire
Repairs/Adjustments
Installation Procedure
1. Place the Tapper Assembly into place on the eWire Frame. Two
tabs are used to align the Front Tapper Assembly.
2. Secure the Front Tapper with the M4 Screws (2)
3. Connect the Sensor Cable and Motor Cable.
4. Do REP 1.1 Top Cover Replacement
5. Connect the Power Cable
6. Turn power ON to the eWire.
01/26/2018
4-138
to replace the Front Cover.
GBC eWire