GBC eWire Service Manual page 184

8. Slide the Belt off the Idler Hub and allow the belt to hang down to
relive tension on the Belt. Remove the inner Bearing, Flange, and
Washer.
Idler Assembly
Repairs/Adjustments
Installation Procedure
1. Reverse the steps in the Removal Procedure to install the new Idler
Pulley Assembly. Note the orientation of the plastic idler component
when installing.
2. Do GP 6.8 to install the Supply Spool.
3. Connect the Power Cord.
4. Power ON the eWire.
01/26/2018
4-68
GBC eWire