GBC eWire Service Manual page 422

GP 6.27 Recommended Tool Kit
Tools recommended for service of the eWire
Standard Tools (metric)
•
7mm Nut Driver
•
5.5mm Nut Driver
•
7mm Open End Wrench
•
5.5mm Open End Wrench
•
10mm Open End Wrench
•
Needle Nose Pliers
•
Phillips Screwdriver
•
Flathead Screwdriver
•
Wire Cutters
•
Metric Allen Key (1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm)
GP 6.28 Other Recommended Tools and Supplies
•
0.25mm, 1mm, and 3mm Shim Gauges
•
0 to 2 kgf Force gage
•
Loctite
•
150mm Metric ruler
GBC eWire
GP 6.29 Cleaning Materials
Use a clean, soft, lint-free cloth or a small paint brush to clean the
following.
•
GP 6.11, External Cleaning
•
GP 6.12, Internal Cleaning
Use a soft cloth and alcohol to clean the following.
•
GP 6.14.1
Use canned air or soft cloth to clean the following
•
GP 6.15, Optical Sensor Cleaning
•
GP 6.19,
Use canned air or vacuum cleaner to clean the following.
•
GP 6.18,
GP 6.30 General Specifications
Error! Reference source not found.6
6-71
Idler Roller Inspection and Cleaning
Slide Carriage Rails
Solenoid Cleaning and Inspection
General Procedures and Information