Rep 3.15.6 Vertical Pushover Cam Replacement - GBC eWire Service Manual

REP 3.15.6 Vertical Pushover Cam Replacement

PARTS LIST ON PL 5.13
Use this procedure to remove and install the Vertical Pushover Cam.
There are 2 identical Vertical Cams, one on the drive side of the
Expanding T and one on the idler side.
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
Removal Procedure
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Do REP 3.15 Element Transfer Module Replacement
Element Transfer Module.
4. Do REP 3.15.5 Horizontal Pushover Cam Replacement
Horizontal Cams.
5. Loosen the set screw.
6. Remove the idler side Cam by sliding the spacer off the shaft and
removing the Cam and Washers.
7. Do REP 3.15.7 Expanding T Motor Replacement M13
Pushover Motor Assembly.
Repairs/Adjustments
8. Loosen the M3 Set Screws (2) securing the Drive Shaft Timing Pulley.
Slide the Timing Pulley off the Shaft.
9. Remove the drive side Cam by sliding it and the washers off of the
drive shaft.
Installation Procedure
1. Slide the Washer and the new Cam onto the Shaft.
2. For the idler side cam, install the Spacer and do REP
3.15.5
Horizontal Cam on the idler side.
3. For the drive side Cam, slide the new Cam and Washers onto the
Drive Shaft. Slide the Timing Pulley onto the drive shaft and secure it
to remove the
using the M3 Set Screws.
4. Do REP 3.15.7
to remove the
replace the Expanding T Pushover Motor Bracket Assembly.
5. Do REP 3.15.5
Horizontal Cam on the drive side.
6. Do REP 3.15
Element Transfer Module.
7. Connect the Power Cord.
8. Power ON the eWire.
Cam
Spacer
to remove the
01/26/2018
4-88
Horizontal Pushover Cam Replacement
Expanding T Pushover Motor Replacement M12
Horizontal Pushover Cam Replacement
Element Transfer Module Replacement
to replace the
to
to replace the
to install the
GBC eWire