Rep 4.8 Vacuum Stacker Belt Replacement - GBC eWire Service Manual

REP 4.8 Vacuum Stacker Belt Replacement

PARTS LIST ON PL 5.15
Use this procedure to remove and install the Vacuum Stacker Belt.
Removal Procedure
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Do REP 4.1 Vacuum Stacker Module Replacement
Vacuum Stacker.
4. Loosen the M3 Screws (3) and remove the side cover. Repeat the
process for the opposite side cover.
GBC eWire
5. Using a flat head screwdriver, loosen and remove the gas spring
socket from the top cover.
to remove the
01/26/2018
4-111
Repairs/Adjustments