Locate Sensor S36, S37, S39:
•
Raise the Top Cover
•
Manually move the closer module forward or back to gain
access if necessary
•
Manually cycle the holder mechanism if necessary
S37
S36, S37 and S39 are located on the Holder Module
GBC eWire
S39
S36
Locate Sensor S38 and S40:
•
Do REP 1.5 to remove the Back Cover.
•
S38 and S40 are most easily viewed from the back.
•
If necessary, move the Holder Module manually to unblock the
sensor.
•
S38 and S40 are located on the Holder Module.
S38
S38 and S40 are located on the Holder Module
01/26/2018
6-29
S40
General Procedures and Information