Rep 11.4 24V Power Supply Replacement - GBC eWire Service Manual

REP 11.4 24V Power Supply Replacement

PARTS LIST ON PL 5.27
Use this procedure to remove and install the 24V Power Supply
Assembly.
Removal Procedure
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Turn off Power to the eWire.
2. Disconnect the Power Cord.
3. Do REP 1.5 Back Cover Replacement
4. Disconnect all connectors from the 24V power supply.
5. Slide the book drawer all the way out of the machine.
Repairs/Adjustments
to remove the Back Cover.
6. While carefully supporting the power supply, remove the M4 Screws
(4) from the rear electrical panel plate. The Screws are located on the
reverse side of the Power Supply.
7. Remove the Power supply from the electrical panel.
01/26/2018
4-182
GBC eWire