D) Close Tray - GBC eWire Service Manual

d) Close Tray

The CLOSE TRAY message indicates that the Book drawer is open or not
completely closed.
1. Check that the Book drawer is closed
The Book drawer is closed.
Y N
Close the Book drawer and return to normal operation.
2. Insert an Interlock Cheater into the Book drawer interlock Switch.
WARNING
Moving Parts, keep hands clear of nips and the belts when
the Interlock Cheater is inserted. See Section 0, page vii
for other languages.
3. Check if the Close Tray message is displayed.
The Close Tray message is displayed.
N Y
Do ADJ 1.7 Book drawer interlock switch adjustment and return
to normal operation
Go to Step 4.
4. Do REP 1.5 to remove the Rear Cover and check if the Interlock
Cable 7716715 (See Section 7, page 7-3) is connected at J2 at the
"B" Main Control Board.
Interlock Cable is connected at J2.
Y N
Make the connection and return to normal operation.
5. Switch OFF the machine and unplug the Power Cord.
6. Remove the M4 screws that hold the Interlock Switch Bracket (PL
5.25) and inspect the connections at the Interlock Switch (see
REP 9.2 Interlock switch replacement for photos of the connections).
Interlock cable is connected at the Interlock switch.
Y N
Make the connection and return to Normal operation
Go to step 7.
GBC eWire
7. Do GP 6.3.7 Firmware Upgrade procedure to re-flash the Firmware
Re-flashing the firmware clears the fault.
Y N
Go to Step 8.
Return to normal operation.
8. Do REP 9.2 Book drawer Interlock Switch Replacement to replace the
Interlock switch.
Replacing the switch clears the fault.
Y N
Go to Step 9.
Return to normal operation.
9. Replace Interlock Switch Cable 7716715.
Replacing the cable clears the fault.
Y N
Go to Step 10.
Return to normal operation.
10. Replace the "B" Main Control Board (REP 11.3).
Replacing the board clears the fault.
Y N
Escalate to second level.
Return to normal operation.
01-26-2018
2-6
RAPS