External Covers; Rep 1.1 Top Cover Replacement - GBC eWire Service Manual

REPLACEMENTS

1. External Covers

REP 1.1 Top Cover Replacement

PARTS LIST ON PL 5.28
Use this procedure to remove and install the Top Cover Assembly.
Warning: Top Cover Assembly is very heavy. Use two people to
remove and use caution when removing the Top Cover Assembly.
Removal Procedure
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Switch power OFF to entire eWire.
2. Disconnect the Power Cord from eWire.
3. Raise the Upper Transport by releasing the latch.
4. Remove the Socket Head Screws (2) that secure the front half of the
Top Cover. There is a screw on each side of the Frame.
Repairs/Adjustments
5. Remove the Socket Head Screws (2) that secure the back half of the
Top Cover. There is a screw on each arm.
6. Slowly lower the Upper Transport down with cover still resting in
place.
7. Carefully lift the entire top cover up and off the machine.
01/26/2018
4-4
GBC eWire