Rep 3.6 Element Feeder Belt Replacement - GBC eWire Service Manual

REP 3.6 Element Feeder Belt Replacement

PARTS LIST ON PL 5.8
Use this procedure to remove and install the Element Feeder Belt.
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
Removal Procedure
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Open the Front Door and slide out the Element Feeder drawer.
4. Do GP 6.8 to remove the Supply Spool.
5. Remove the Element Belt Guard by removing the M3 Screws (2).
Repairs/Adjustments
6. Do REP 3.11 Element Feed Belt Idler Replacement
Element Feed Belt Idler Assembly.
7. Remove the M3 Flat Head Screws (4) securing the Belt Retainer
Plate.
8. Remove the Belt Retainer.
9. Do REP 3.13 to remove the Element Engagement Guide Assembly
10. Carefully slide the Element Feed Belt off the Pulleys and out of the
Element Feeder.
01/26/2018
4-56
to remove the
GBC eWire