GBC eWire Service Manual page 376

GP 6.4.3 Check S18-S21, S24, S31-S41, S46-S49
Locate Sensor S18:
•
Raise the top Cover.
•
If Necessary, do REP 1.8 to remove the Front Cover.
•
Locate the Front Tapper 7716863
•
Rotate the tapper assembly manually so that the encoder wheel
rotates within the sensor. The sensor will become unblocked
when the encoder window is centered within the sensor detect
area.
S18 is located in the front tapper module
GBC eWire
Locate Sensor S19:
•
Raise the top Cover.
•
Locate the Rear Tapper 7716874
•
Rotate the tapper assembly manually so that the sensor is
blocked or unblocked. The sensor will become unblocked
when the encoder window is centered within the sensor
detect area.
S19 is located in the tapper at the rear of the machine
01/26/2018
6-25
General Procedures and Information