GBC eWire Service Manual page 385

GP 6.4.5 Check S26 - S30, S50
Locate Sensor S26 through S30:
•
Slide the Element Feeder tray all the way out of the machine
•
Do GP 6.8 to Remove the element spool.
•
Sensors can be blocked using a piece of paper.
S26 through S30 are located on the front face of the element feeder
spindle assembly
General Procedures and Information
Locate Sensor S50:
•
Slide the Element Feeder tray all the way out of the machine
•
Do GP 6.8 to Remove the element spool.
S50 is located on the side face of the element feeder spindle
assembly
01/26/2018
6-34
S50
GBC eWire