Rep 9.7 Vacuum Fan Replacement - GBC eWire Service Manual

REP 9.7 Vacuum Fan Replacement

PARTS LIST ON PL 5.26
Use this procedure to remove and install the Vacuum Fan.
Removal Procedure
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Turn off Power to the eWire.
2. Disconnect the Power Cord.
3. Do REP 1.6 Side Cover Replacement
4. Disconnect the Vacuum Fan Cables.
GBC eWire
to remove the Side Cover.
5. Remove the M4 Screws (4) securing the Vacuum Fan and remove
the old fan.
Installation Procedure
1. Reverse the steps in the Removal Procedure
2. Connect the Power Cord.
3. Turn on power to the eWire.
01/26/2018
4-171
Repairs/Adjustments