GBC eWire Service Manual page 381

Locate Sensor S41:
•
S41 is located on the Alignment Module.
•
In order to test S41, do GP 6.3.6 Functional Tests and select
"Aligner Test." Remove the Interlock cheater before the
Functional Test is complete. Return to Sensor Check mode to
confirm the sensor is unblocked. Insert the cheater which will
cause the Aligner to home. S41 should then be blocked.
S41 are located on the Alignment Module
General Procedures and Information
S41
Locate Sensor S46 and S49:
•
Raise the Top Cover and Lower Bypass.
•
Manually move the closer module forward or back if needed
to unblock the Sensor.
•
The Sensor can be blocked or unblocked by inserting a piece
of paper or other solid object.
S49
S46 and S49 are located the back frame behind the closer
01/26/2018
6-30
S46
GBC eWire