Vacuum Stacker Module; Rep 4.1 Vacuum Stacker Module Replacement - GBC eWire Service Manual

4. Vacuum Stacker Module

REP 4.1 Vacuum Stacker Module Replacement

PARTS LIST ON PL 3.5
Use this procedure to remove and replace the Vacuum Stacker.
Removal Procedure
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
15. Turn off Power to the eWire.
16. Disconnect the Power Cord.
17. Raise the Lid.
18. Disconnect the cable from the Vacuum Stacker.
19. Disconnect the motor from the Driver Board Extension Cable
GBC eWire
20. Remove the M5 Screws (2) and Hinge Pivots (2) securing the Paper
Tray and remove it from the machine.
21. Remove the M4 screws (2) from the front hinge bracket.
01/26/2018
4-97
Repairs/Adjustments