Rep 10.4 Book Drawer Drive Motor Replacement M19 - GBC eWire Service Manual

REP 10.4 Book Drawer Drive Motor Replacement M19

PARTS LIST ON PL 5.23
Removal Procedure
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Turn off Power to the eWire.
2. Disconnect the Power Cord.
3. Slide the Book Drawer Tray all the way out of the eWire.
4. Remove the Book Tray Rear Cover by removing the M4 Screws (4).
5. Do REP 10.5 to remove the belt.
6. Disconnect the Motor Cable.
GBC eWire
7. Remove the Motor Bracket by removing the M4 Nuts (2).
8. Remove the M19 motor by removing the M4 mounting screws (4).
Installation Procedure
1. Reverse the Steps in the Removal Procedure
2. Connect the Power Cord.
3. Turn on power to the eWire.
01/26/2018
4-177
Repairs/Adjustments