GBC eWire Service Manual page 216

8. Loosen and remove the M4 Screws (2) securing the kick-down
solenoid mounting bracket, and remove the Solenoid Assembly.
9. Use an adjustable wrench to loosen the nut securing the Solenoid to
the bracket.
Repairs/Adjustments
10. Remove the Kick-Down Solenoid Assembly from the Vacuum
Stacker.
Installation Procedure
1. Reverse the steps from the Removal Procedure.
2. Do REP 4.1 Vacuum Stacker Module Replacement
Vacuum Stacker.
3. Connect the Power Cord
4. Turn on the eWire.
01/26/2018
4-100
to install the
GBC eWire