GBC eWire Service Manual page 48

GBC eWire
RAP 3.6.2 First jammed sheet before the Diverter gate
Follow the below procedure when the first jammed sheet is before the
Diverter gate
1. Inspect Diverter gate solenoid L1- GP 6.18.
This clears the fault
Yes- Return to normal operation
2. Do GP 6.3.1 to check if the line speed is set correctly.
Line speed is set correctly
Yes- Go to Step 2
3. Check for any obstructions in the paper path leading to the diverter
gate. Remove any obstruction.
This clears the fault
Yes- Return to normal operation
01-26-2018
2-24
No- Go to Step 2
No- Set the correct speed
No- Go to Step 3
RAPS