Rap 6.3 J445- Book Drawer Full - GBC eWire Service Manual

12. Do REP 11.1 Main Control Board A Replacement
This clears the fault
Yes- Return to normal operation;
No- Escalate to second level
GBC eWire
RAP 6.3 J445- BOOK DRAWER FULL
The maximum number of books for each element size is predetermined in
the firmware. As the system processes every book, the counter keeps
increasing and when it reaches the max count, the LCD screen displays
J445 BOOK DRAWER FULL.
When the book drawer full message is displayed, every book in the book
drawer must be removed to clear the message. For example, if there are
10 books in the drawer, all 10 books will have to be removed to clear the
message.
Every time the book drawer is opened and closed, the system checks for
the presence of residual books. If there are no books present (which
could also include the case of the operator emptying the book drawer
prior to the Full message being displayed), the count is reset and the
machine will process books to the maximum capacity.
Book drawer Full message is also displayed if S42 Book Drawer Full Up
sensor AND S43 Book Drawer Full Down sensor are covered at the same
time.
If the Book drawer message is displayed erroneously, follow the below
procedure for troubleshooting:
1. Do GP 6.4 to check S45 Book Drawer Empty sensor
This clears the fault.
Yes- Return to normal operation; No- Go to Step 2
2. Do 6.3.7 FIRMWARE UPGRADE Procedure to Re-flash the firmware
for eWire.
This clears the fault
Yes- Return to normal operation;
3. Do REP 11.1 Main Control Board A Replacement.
This clears the fault
Yes- Return to normal operation
01-26-2018
2-78
No- Go to Step 3
No- Escalate to second level
RAPS