GBC eWire Service Manual page 176

6. Disconnect the Motor Cable from the Stepper Motor Driver.
7. Loosen the set screw and remove the Element Sprocket Knob.
Repairs/Adjustments
8. Do REP 3.13 Element Sprocket Nose Replacement
Element Sprocket Nose Assembly.
9. While supporting the Motor with your free hand, remove the M3
Screws (4) mounting the Stepper Motor.
10. Remove the Motor.
Installation Procedure
1. Reverse the steps in the Removal Procedure.
2. Connect the Power Cord.
3. Power ON the eWire.
01/26/2018
4-60
to remove the
GBC eWire