Rep 10.3 Book Drawer Full Sensor Replacement S45 - GBC eWire Service Manual

REP 10.3 Book Drawer Full Sensor Replacement S45

PARTS LIST ON PL 5.23
WARNING
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Remove the Book Drawer Side Cover by removing the M4 Screws
(4).
4. Remove the Sensor Bracket by removing the M4 nuts (2).
Repairs/Adjustments
5. Remove the Sensor from the Bracket by removing the M2 Screws.
Installation Procedure
1. Attach the new Sensor to the Sensor Bracket using the M2 Screws
(2).
2. Attach the Sensor Bracket using the M4 Nuts (2).
3. Replace the Book Drawer Side Cover.
4. Connect the Power Cord.
5. Power ON the eWire.
01/26/2018
4-176
GBC eWire