C) Book Tray Full - GBC eWire Service Manual

c) Book Tray Full
The BOOK TRAY FULL message indicates that the book tray capacity
has been reached and the tray needs to be emptied.
1. Open the Book drawer by pulling the drawer out.
2. Remove all the bound books from the tray. Note that all the books
need to be removed to clear this message.
3. Re-insert the book drawer.
This clears the fault code.
Y N
Go to step 4.
Normal operation.
4. Do GP 6.4 to check Sensor 42 & Sensor 45 Book drawer Full
This clears the fault code.
Y N
Go to step 5.
Normal operation.
5. Do GP 6.5 to check Motor 19 Drawer elevation motor
This clears the fault code.
Y N
Go to step 6.
Normal operation.
6. Inspect the pulley lift mechanism for the Book Drawer. Repair or
replace any damaged components.
This clears the fault code.
Y N
Go to step 7.
Normal operation.
7. Do GP 6.3.7 to re-flash the firmware.
This clears the fault code.
Y N
Go to step 8
Normal operation
GBC eWire
8. Replace Control board "B" (REP 11.3)
This clears the fault code.
Y N
Escalate to second level.
Normal operation.
01-26-2018
2-5
RAPS