Frame; Rep 9.1 Interlock Switch Replacement, Top Cover - GBC eWire Service Manual

Installation Procedure
1. Reverse the Steps found in the Removal Procedure
2. Connect the Power Cord
3. Turn power ON to eWire.
GBC eWire

9. Frame

REP 9.1 Interlock Switch Replacement, Top Cover

PARTS LIST ON PL 5.25
Use this procedure to remove and install the Interlock Switch for the Top
Cover.
Removal Procedure
Do not perform repair activities with the power on or electrical power
supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury. See Section 0, page vi for other languages.
1. Switch power OFF to eWire.
2. Disconnect the Power Cord.
3. Raise the Top Cover.
4. Remove the M4 Screws (2) to remove the Interlock Bracket.
5. Disconnect the Cables to the Interlock Switch. Note the orientation of
the Cables as they need to be re-installed in the same configuration.
01/26/2018
4-163
WARNING
Repairs/Adjustments