GBC eWire Service Manual page 233

7. Remove the M4 Screws (2) from the back of the Deflector
8. Carefully lift the Deflector out of the eWire to remove it.
GBC eWire
Installation Procedure
1. Place the Deflector Module onto the eWire. Use the pins on the
bottom of the Deflector to align the module.
2. Reattach the Deflector Module to the Frame by securing the M4
Screws (4).
3. Reattach the deflector cable cover and secure it using the M3 Screw.
4. Reconnect the Deflector cables to the headers on the back of the
Deflector.
5. Connect the Power Cord.
6. Power ON the eWire.
01/26/2018
4-117
Repairs/Adjustments