Gp 6.1.3 Accessing The Service Interface Menu - GBC eWire Service Manual

GP 6.1.3 Accessing the Service Interface Menu
The Service Interface allows you to:
•
Set the Line Speed and Printer Type.
•
Check the operation of the Sensors, Solenoids, and Motors.
•
Perform Functional Tests for key modules and processes.
•
Perform Firmware Upgrade.
When the Service Interface is open, the top row of text and the bottom
row of text display the options on the Service User Interface menu.
To enter the Service User Interface:
1. Press and hold both the Up Arrow button and the Down Arrow button
for 5 seconds.
2. Then while still holding down the Up Arrow button and the Down
Arrow button, press the Enter button.
3. The Service User Interface screen will appear.
4. Use the procedures in the following pages to use Service User
Interface
GBC eWire
01/26/2018
6-5
General Procedures and Information