GBC eWire Service Manual page 113

Crushed Wire
Wire can become crushed when the spool is miss handled. Below
is an example of a crushed length of wire. Crushed wire must be
cut off and discarded.
Tangled Wire
If the spool is stored without the wire properly secured with the
magnet strips, the wire may become entangled. This can be fixed
by carefully separating the entangled rows. Once untangled,
check that no other damage is present before using this spool.
The most common damage occurring from this is a stretched wire
(see above).
Loose Element
The eWire™ will prompt the user to clear extra elements from 3b
after a stoppage occurs. If this is not done the element may fall
into the element feeder area and cause a wire jam to occur. The
wire could fall on top of the spool as shown below.
GBC eWire
The wire may fall to the bottom of the element drawer.
If this occurs, carefully remove the loose element/s and check the
spool for damage. The most common damage occurring from this
is stretched wire (see above).
02/20/2018
3-9
Punch Quality