Adj 1.5 Book Drawer Closed Position - GBC eWire Service Manual

ADJ 1.5 Book Drawer Closed Position

To ensure that the completed books drop into the book drawer from the
closer module, the book drawer must be centered within the machine.
Inspection Procedure
1) Open the top cover and the lower paper transport.
2) With the book drawer closed, inspect the position of the book drawer
in regards to the opening in the machine.
3) If the book drawer is not well centered, an adjustment is required.
Adjustment Procedure
1) Open the book drawer and locate the book drawer stop latch bracket.
2) Loosen the screws securing the bracket.
3) Shift the bracket in the direction that you desire to move the book
drawer, then tighten the screws.
4) Close the book drawer and inspect its position as defined in the
Inspection Procedure section mentioned above.
GBC eWire
01/26/2018
4-193
Repairs/Adjustments