interface
Command
EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.2(0.2)
feature fip-snooping
Enable FCoE transit and FIP snooping on a switch.
Z9500
Syntax
feature fip-snooping
FCoE Transit
•
all — Enter the keyword all to enable debugging on all
the options.
•
discovery — Enter the keyword discovery to enable
debugging on FCF advertisements and ENode
solicitation.
•
virtual-link-instantiation — Enter the keywords
virtual-link-instantiation to enable debugging
on FLOGI, FDISC, and FLOGO packets.
•
virtual-link-maintenance — Enter the keywords
virtual-link-maintenance to enable debugging on
FIP clear virtual link frames and keepalives.
•
vlan-discovery — Enter the keywords vlan-
discovery to enable debugging on VLAN requests and
notifications.
Enter the following keywords and slot/port or number
information:
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
•
For a port channel interface, enter the keywords port-
channel then a number.
Description
Introduced on the Z9500 and S6000-ON.
Introduced on the S4810 and S4820T. Added the receive
parameters packet-type and interfaces and their
options.
739