Feature Fip-Snooping - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.2(0.2)

feature fip-snooping

Enable FCoE transit and FIP snooping on a switch.

feature fip-snooping

To disable the FCoE transit feature, use the no feature fip-snooping

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

FCoE Transit

vlan-discovery — Enter the keywords vlan-

discovery to enable debugging on VLAN requests and

notifications.

Enter the following keywords and slot/port or number

information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

Introduced on the S4810 and S4820T. Added the receive

parameters packet-type and interfaces and their