Version 8.3.16.0
feature fip-snooping
Enable the FIP snooping feature on a switch.
S4810 and MXL Switch
Syntax
feature fip-snooping
To disable the FIP snooping feature, use the no feature fip-snooping command.
Defaults
Disabled
Command Modes
CONFIGURATION
Command History
Version 8.3.12.0
Version 8.3.16.0
fip-snooping enable
Enable FIP snooping on all VLANs or on a specified VLAN.
S4810 and MXL Switch
Syntax
fip-snooping enable
To disable the FIP snooping feature on all or a specified VLAN, use the no fip-snooping
enable command.
Defaults
FIP snooping is disabled on all VLANs.
Command Modes
Command History
Version 8.3.12.0
Version 8.3.16.0
Usage
The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum
Information
number of FIP snooping sessions supported per ENode server is 16.
Introduced on the MXL 10/40GbE Switch IO Module.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
•
CONFIGURATION
•
VLAN INTERFACE
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
627