Feature Fip-Snooping - Dell Z9500 Command Reference Manual

feature fip-snooping

Enable FCoE transit and FIP snooping on a switch.
Z9500
Syntax
feature fip-snooping
To disable the FCoE transit feature, use the no feature fip-snooping
command.
Defaults Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.7(0.0)
8.3.19.0
8.3.12.0
fip-snooping enable
Enable FIP snooping on all VLANs or on a specified VLAN.
Z9500
Syntax
fip-snooping enable
To disable the FIP snooping feature on all or a specified VLAN, use the no fip-
snooping enable command.
Defaults FIP snooping is disabled on all VLANs.
Command
•
Modes
•
FIP Snooping
Description
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
CONFIGURATION
VLAN INTERFACE
767