NEC Univerge sv8500 Manual page 347

23. Setting Synchronous Ringing:
2A-MC>SET SYNCRINGING OFF
Synchronous Ringing setting succeeded.
2A-MC>_
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
24. Setting Balancing Network (BNW) to each channel:
2A-MC>SET VALUE CHANNEL BNW00 1
The BNW setting value is determined by the country and the kind of BNW for each channel as shown in the
Note:
following table. (For the COUNTRYCODE, refer to the set command
COUNTRY
North America/
countries applying µ-law interface
Australia
China
Brazil
countries applying A-law interface
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
Line 1: Enter ON or OFF, whether the ringer of both
Line 2: Result is shown
Line 1: Enter the BNW value in the range 0-1 (de-
BNW SET-
TING VALUE
0
1
0
1
0
1
0
1
0
1
VOL.2-94
Analog 2MC (Analog Media Converter)
channels ring simultaneously or not
ON=Ringer timing synchronizes
OFF=Ringer timing does not synchronize (de-
fault)
fault=0) after the parameters VALUE,
CHANNEL, and BNW00/BNW01
BNW00: to channel 0
BNW01: to channel 1
KIND OF BNW
600Ω
µ
350+(1K//0.21 )
600Ω
220+(820//120n)
220+(560//100n)
220+(560//100n)
800//50n
900Ω
600Ω
µ
350+(1K//0.21 )