Show Command - NEC Univerge sv8500 Manual

SHOW COMMAND

1. To show the setting of Burst Ringer Pattern:
2A-MC>SHOW BURSTPATTERN
Burst Ringer Pattern no.5 (0.25s ON-0.25s OFF-0.25s
ON-0.25s OFF)
2A-MC>_
2. To show Circuit Attribute:
:
2A-MC>SHOW CHANNELATTRIBUTE 0
Circuit number 0:
NLP is ON
2A-MC>SHOW CHANNELATTRIBUTE
Circuit number 0:
NLP is ON
Circuit number 1:
NLP is ON
2A-MC_
3. To show Country Code:
2A-MC>SHOW COUNTRYCODE
Use country is JPN. (Japan code : 0x0001)
2A-MC>_
4. To show DHCP setting:
2A-MC> SHOW DHCP
DHCP is ENABLE
2A-MC>_
Analog 2MC (Analog Media Converter)
Line 1:
Line 2: Currently
Line 3:
Line 1: Enter the Channel Number after the Command
Name
Line 2: Circuit Number
Line 3: The current setting of designated circuit is shown
When Circuit Number is not specified, the infor-
mation of both circuits is shown
Line 1:
Line 2: The current setting is shown
Line 3:
Line 1:
Line 2: The current setting is shown
Line 3:
VOL.2-99
registered Burst
Ringer Pattern is shown