Command
CONFIGURATION
Modes
Command
Version
History
9.7(0.0)
Usage
The dcb-map linecard all backplane all command overwrites any
Information
previous DCB maps applied to backplane
dcb-policy buffer-threshold sfm all port-set all backplane
all
Assign the DCB policy to all sfm and backplane ports interfaces. This setting takes precedence over the
global buffer-threshold interface configuration.
Syntax
dcb-policy buffer-threshold sfm all port-set all backplane all
<dcb-policy-name>
Parameters
buffer-
threshold
Defaults
None.
Command
GLOBAL CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Usage
You can configure dcb-policy on all sfm and backplane ports and assign dcb-
Information
policy to the backplane ports.
Example
dcb-policy buffer-threshold sfm all backplane all test
Data Center Bridging (DCB)
Description
Introduced on the Z9500.
Configure the profile name for the DCB buffer threshold
Description
Introduced on the Z9500.
629