Service-Policy Input - Dell S4810 Reference Manual

Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Related
rate shape
Commands
qos-policy-output

service-policy input

Apply an input policy map to the selected interface.
S4810
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy
input policy-map-name [layer2] command.
Parameters
policy-map-
name
layer2
Defaults Layer 3
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Usage You can attach a single policy-map to one or more interfaces to specify the
Information service-policy for those interfaces. A policy map attached to an interface can be
modified.
1366
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— shapes traffic output as part of the designated policy.
— creates a QoS output policy.
Enter the name for the policy map in character format (32
characters maximum). You can identify an existing policy
map or name one that does not yet exist.
(OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Quality of Service (QoS)