Honda ACCORD HYBRID 2005 Service Manual page 1647

S u n l i g h t S e n s o r T e s t
1. Remove the sunlight sensor (A) (see page 21-77).
PUR ORN
2. Turn the ignition switch ON (II). Measure the
voltage between the terminals w i t h the ( + ) probe
on the No. 2 terminal and the ( — ) probe on the
No. 1 terminal w i t h the 2P connector connected.
NOTE: The voltage readings w i l l not change under
the light of a flashlight or a fluorescent lamp.
Voltage should be:
• 3.6—3.7 V or more w i t h the sensor out of direct
sunlight.
• 3.3—3.5 V or less w i t h the sensor in direct
sunlight.
3. If the voltage is not as specified, replace the
sunlight sensor (see page 21-77).
us
S u n l i g h t S e n s o r R e p l a c e m e n t
1. Remove the upper panel f r o m the dashboard
(see page 20-68).
2. Remove the sunlight sensor (A) f r o m the upper
panel (B). Be careful not to damage the sensor.
3. Install the sensor in the reverse order of r e m o v a l .
21-77