Honda ACCORD HYBRID 2005 Service Manual page 1666

Climate Control
A / C Compressor Thermal Protector
Replacement
1. Remove the bolts, and the holders (A). Disconnect
the thermal protector connectors (B), then remove
the thermal protector (C).
2. Replace the thermal protector (A) w i t h a new one,
and apply silicone sealant (B) to the b o t t o m of the
thermal protector.
B
A / C Compressor Relief Valve
Replacement
1. Recover the refrigerant w i t h a recovery/recycling/
charging station (see page 21-103).
2. Remove the relief valve cover (A), the relief valve
(B), and the O-ring (C). Plug the opening to keep
foreign matter f r o m entering the system and the
A/C compressor oil f r o m running out.
B
9.8 N-m
(1.0 k g f m , 7.2 Ibf-ft)
3. Clean the mating surfaces.
4. Replace the O-ring w i t h a new one, and apply a thin
coat of refrigerant oil before installing it.
5. Remove the plug, and install and tighten the relief
valve.
6. Charge the system (see page 21-105).
3. Install the thermal protector in the reverse order of
removal.
21-96