Avaya DEFINITY Server CSI Maintenance Manual page 270

Maintenance Commands
Output
get boot-image 1C07
Image 1
Board Type: TN2501
FW Vintage: 02
HW Signature: 02
Suffix: A
Date: 03/02/02
Timestamp: 10:30:50
CRC Checksum: Good
Active Image: Yes
Reboot Image: Yes
Screen 58. Display Firmware Image(s)
Field descriptions
Board Type
FW Vintage
HW Signature
Suffix
Date
Timestamp
CRC Checksum
Active Image
Reboot Image
270
Issue 5 October 2002
DISPLAY FIRMWARE IMAGE(S)
Image 2
TN2501
02
02
A
03/02/01
12:42:18
Good
No
No
For VAL, this field is TN2501
The firmware vintage number
The hardware signature number
The circuit pack suffix code letter
The date the firmware file was created or transferred to
the circuit pack
The time that the firmware file was created or transferred
to the circuit pack
Cyclic Redundancy Check (data integrity algorithm)
y indicates the active firmware image file.
n indicates the inactive firmware image file.
To change the active image file, use the
command.
y indicates that this image becomes active after a system
reset.
n indicates that this image becomes inactive after a
system reset.
set boot-image
555-233-119