List Testcalls - Avaya DEFINITY Server CSI Maintenance Manual

list testcalls

Output
The following examples shows the output from list sys-link.
list sys-link
Location
01A0516
Field descriptions
Location
Link Type/Channel
State
Current Path
Faulted Path
Last Fault Recorded
list testcalls
Use list testcalls to generate an Automatic Transmission Measurement System
(ATMS) report. The ATMS allows the voice and data trunk facilities to be
measured for satisfactory transmission performance. The performance of the
trunks is evaluated according to measurements produced by a series of analog
tests and are compared against user-defined threshold values. The report
provides measurement data to help determine the quality of trunk lines. The
measurement report contains data on trunk signal loss, noise, singing return loss,
and echo return loss.
555-233-119
SYSTEM LINKS INFORMATION
Link Type/ State Current
Channel Path
PRI up present
Physical location of the port associated with the system link
(cabinet-carrier-slot-circuit)
Type of system-link and the processor channel number of
the link (if there is one)
For TN2402/TN798, link type is PRI (PRI).
System link state: up or down
Status of the current path: none if the link is down; present
if the current path is valid
Specifies the faulted path status: present if the link has
been faulted at least once, none if the link has never gone
down, and default if the default faulted path is being used
Date and time of the most recent fault
Page 1
Faulted Last Fault
Path Recorded
present 12/30/1996 14:18
Issue 5 October 2002
SPE A
341