Atm-Intf (Tn2305/6) - Avaya S8700 Maintenance Manual

ATM-INTF (TN2305/6)

ATM-INTF (TN2305/6)
MO's Name
(in Alarm
Log)
ATM-INTF
The system recognizes a TN2305/6 as an ATM interface board (ATM-INTF)
unless it has an assigned personality (using the add atm pnc command or add
atm trunk command). ATM-INTF does not have an associated maintenance
strategy, although the:
list config and change circuit-pack commands reveal the board
test board command can run an on-demand Control Channel test
reset board command can reset the board
The following circuit packs are ATM-EI boards if they are administered to provide
ATM port-network connectivity (ATM PNC).
Table 8-96. ATM-EI circuit packs for ATM PNC
Circuit Pack
TN2305
TN2306
NOTE:
Always replace an ATM-EI circuit pack with the same type.
Error Log Entries and Test-to-Clear Values
Table 8-97. ATM-INTF Error Log Entries
Error Aux
Type Data
23 (a) 0
125 (b)
217 (c) 0
555-233-143
Initial Command to
Alarm Level Run
WARNING test board UUCSSpp
Fiber
Multimode
Single-mode
Associated Alarm
Test Level
None Warning
None Minor
None Warning
Full Name of MO
ATM interface board
Echo Cancellation Release
Yes 7.1
Yes 7.1
On/Off
Board Test-to-Clear Value
Off
On
Off
Issue 1 May 2002 8-229