24
:POWer Commands
:POWer:SWITch:VREFerence
Command Syntax
:POWer:SWITch:VREFerence <percent>
<percent> ::= percent in NR1 format
The :POWer:SWITch:VREFerence command to specify the voltage switching
level for the switching edges. The value is in percentage of the maximum
switch voltage.
You can adjust this value to ignore noise floors.
This value specifies the threshold that is used to determine the switching
edges.
Query Syntax
:POWer:SWITch:VREFerence?
The :POWer:SWITch:VREFerence query returns the voltage switching level
percent value.
Return Format
<percent><NL>
<percent> ::= percent in NR1 format
See Also
•
•
•
•
•
590
(see
page
1138)
":POWer:SWITch:APPLy"
":POWer:SWITch:CONDuction"
":POWer:SWITch:IREFerence"
":POWer:SWITch:RDS"
":POWer:SWITch:VCE"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 585
on page 586
on page 587
on page 588
on page 589