Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 111

Table 21 :RECall Commands Summary
Command
:RECall:ARBitrary:[ST
ARt] [<file_spec>][,
<column>][,
<wavegen_id>] (see
page 615)
:RECall:FILename
<base_name> (see
page 616)
:RECall:MASK[:STARt]
[<file_spec>] (see
page 617)
:RECall:PWD
<path_name> (see
page 618)
:RECall:SETup[:STARt]
[<file_spec>] (see
page 619)
:RECall:WMEMory<r>[:S
TARt] [<file_name>]
(see page 620)
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
Query
n/a
:RECall:FILename?
(see page 616)
n/a
:RECall:PWD? (see
page 618)
n/a
n/a
Commands Quick Reference
Options and Query Returns
<file_spec> ::= {<internal_loc>
| <file_name>}
<column> ::= Column in CSV file
to load. Column number starts
from 1.
<internal_loc> ::= 0-3; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
<wavegen_id> ::= {WGEN1 | WGEN2}
<base_name> ::= quoted ASCII
string
<file_spec> ::= {<internal_loc>
| <file_name>}
<internal_loc> ::= 0-3; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
<path_name> ::= quoted ASCII
string
<file_spec> ::= {<internal_loc>
| <file_name>}
<internal_loc> ::= 0-9; an
integer in NR1 format
<file_name> ::= quoted ASCII
string
<r> ::= 1 to (# ref waveforms) in
NR1 format
<file_name> ::= quoted ASCII
string
If extension included in file
name, it must be ".h5".
4
111