Clear Ip Routes Download - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

clear ip routes download

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
For a specific VRF
clear ip routes download [ vrf vrfName ] { ipAddress ipMask | * }
For all virtual routers
clear ip routes download { all | reload }
Command introduced in JunosE Release 8.1.0.
Synchronizes downloaded access routes and the routes installed in the routing table.
This command has no effect if a download operation is in progress. There is no no version.
vrfName—Name of the VRF; string of 1–32 alphanumeric characters; the current virtual
router is used by default
ipAddress—IP address prefix to clear
ipMask—Network mask of the IP address prefix to clear
*—Clears all dynamic routes that are installed in the routing table of the current virtual
router or specified VRF
all—Clears all downloaded routes that are installed in the routing tables of all virtual
routers and VRFs.
reload—Performs a route download operation, then clears all downloaded routes from
the routing tables in all virtual routers and VRFs.
Privileged Exec
Chapter 4: C Commands
401