Class-Int - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

class-int

Syntax
Release Information
Description
Options
Mode
354
class-int vcClassName
no class-int [ vcClassName ]
Command introduced in JunosE Release 7.3.0.
When issued from Interface Configuration mode, assigns a previously configured VC
class to an ATM major interface. When issued from Subinterface Configuration mode,
assigns a previously configured VC class to a static ATM 1483 subinterface. Issuing this
command applies the set of attributes in the specified VC class to the ATM data PVCs
statically or dynamically created on the ATM major interface or ATM 1483 subinterface.
The no version removes the VC class association with the interface or subinterface, and
causes the router to set the PVC attributes to their systemwide default values, or to the
values set in the associated VC class with the next highest order of precedence.
vcClassName—Name of the VC class configured with the vc-class atm command
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.