Removing/Replacing An Injector Module - Thermo Scientific TRACE 1600 Hardware Manual

Removing/Replacing an Injector Module

Thermo Scientific
This section provides the instructions for removing/replacing a front/back injector module.
Figure 217. Example of Injector Module
Module Flap Cover
Lifting Handle
Figure 218. Replacing a Front Injector Module
Figure 219. Replacing a Back Injector Module
6
Injectors Advanced Maintenance
Removing/Replacing an Injector Module
Captive Fixing Screws
Example of Injector Module
Example of Injector Module
TRACE 1600/1610 Hardware Manual 245