Thermo Scientific TRACE 1600 Hardware Manual page 294

6
Injectors Advanced Maintenance
Cleaning the PTV Injector Head Assembly
262 TRACE 1600/1610 Hardware Manual
Figure 227. PTV Top Parts and Liner Removal
Septum Cap
Septum
Liner Cap
Liner Seal (O-ring)
Liner
Injector Head Assembly
9. Remove the fan assembly.
The fan is fixed on a support. Do not remove the fan from its support but remove the
assembly proceeding as follows:
a. Using tweezers and a T10 Torxhead screwdriver, unscrew the left fixing screw of the
support, then unscrew the right fixing screw. See Figure 228.
Thermo Scientific