Maintaining A Programmable Temperature Vaporizing Injector With; Backflush (Ptvbkf) - Thermo Scientific TRACE 1600 Hardware Manual

Maintaining a Programmable Temperature Vaporizing Injector with

Backflush (PTVBKF)

Thermo Scientific
8. If present, move the autosampler towards the module to restore the original alignment.
9. Turn the carrier gas on.
10. Set the normal injector, detector, and GC working conditions.
This section provides instructions for maintaining an Instant Connect Programmable
Temperature Vaporizing injector for backflush (PTVBKF) applications.
The module and injector components are shown in
Figure 109. PTVBKF Module Components
Module Flap Cover
Split Line Vent
Purge Line Vent
Carrier Line Filter
Septum Cap
Injector Head Assembly
Injector Body
Cooling Fan
Split Line Filter
Module Cover
Insulator Cover
Bottom Fittings
Backflush Line Fitting
Fitting Cap, Backflush Line
Maintaining a Programmable Temperature Vaporizing Injector with Backflush (PTVBKF)
Backflush Line
3
Performing Injectors Routine Maintenance
Figure 109 and Figure 110.
TRACE 1600/1610 Hardware Manual 137