Thermo Scientific TRACE 1600 Hardware Manual page 75

Thermo Scientific
Figure 47. Scanning for Instruments
7. At the end of the scan, all the equipment powered on and connected to the LAN is
displayed. Only the SCAN button is enabled. See the example in
Figure 48. Equipment Connected to the LAN
Note To repeat the scan, click SCAN.
8. Select the GC to set up. All the three buttons on the top of the page are enabled. See the
example in Figure 49.
1
Setting the LAN Communication
Figure 48.
TRACE 1600/1610 Hardware Manual
Installation
43