4
Performing Detectors Routine Maintenance
Maintaining a Nitrogen Phosphorous Detector (NPD)
164
TRACE 1600/1610 Hardware Manual
Figure 128. NPD Thermionic Source Cable Removal
10. Unscrew and pull out the straight jack connector of the collecting electrode cable from
the collecting electrode bulkhead jack. See
Figure 129. Collecting Electrode Cable Removal
11. Remove the thermionic source.
Thermionic Source Assembly Cable
Thermionic Source Assembly
Figure
129.
Collecting Electrode Cable
Collecting Electrode Straight Jack
Connector
Thermo Scientific