Thermo Scientific TRACE 1600 Hardware Manual page 443

Thermo Scientific
Figure 391. Transfer Line Nut and SilTite Ferrule Orientation
SilTite Ferrule
7. Insert the column into the column measuring tool (see
Toolkit, so that it is even with the lines at the end of the column.
proper positioning of the column in the tool for accurate measuring.
8. Use a scoring wafer to score and break the column. Use a magnifying glass to check for an
even, flat cut. Repeat if necessary.
9. Use a 5/16 in. wrench to hold the column measuring tool steady.
Figure 392. Column Measuring Tool
10. While holding the column measuring tool steady, tighten the transfer line nut with a
1/4 in. wrench until the column just stops moving in the ferrule.
11. Turn the transfer line nut 1 flat backward so the column is able to move in the ferrule
with slight resistance.
12. Line up the outlet of the column with the arrows on the end of the column measuring
tool.
Figure 393. Lining Up the Column in the Column Measuring Tool
Column Outlet
Flat on the Transfer Line Nut
Transfer Line Nut
8
Installing Optional Kits
Installing the NoVent Microfluidics
Figure 392), which is in the ISQ
Figure 393 indicates
TRACE 1600/1610 Hardware Manual 411